NEW CRANE DRAIN
Hard-to-find drain will fit most Crane sinks that have the internal fork in the overflow chamber. Due to their unique drain lifting mechanism, the only thing that will fit Crane sinks is one specifically designed for a Crane fixture. This OEM replacement has been machined from an original for an exact fit. Fork not included. Includes 4" x 1 1/2" tail piece.
24-CD Polished Brass, complete 250.00 
24-CDN Nickel Plated, complete 295.00 
24-CDS Polished Brass, stopper only 89.00
24-CDSN Nickel Plated, stopper only 118.00 

Crane drain washer only. Flat washer for underside of sink on Crane drains. Use plumber’s putty under top drain flange and this replacement washer on the underside to re-seal Crane drains to the sink basin.
62-OCDW Crane drain washer only for original Crane Drains
(does not fit new Crane drain)  6.95

Replacement Drain Forks for Crane: Crane made at least 20 different fork assemblies for different models of sinks. If you have a broken fork, send the assembly to us and we’ll try to match it up with one from our stock. Click here for information on sending us your drain fork. If your sink is missing the fork entirely, the odds of

Crane Drain Nut/Tailpiece Adapter
We got tired of finding nice Crane sinks missing the nut on the bottom of the sink. This is the nut that both retains the drain and also converts the drain to the fine 1 1/2” tailpiece thread. (our part # 81-371) These have not been made for years, and often get damaged during sink repairs. Supplied with washer, and comes in both polished nickel for exposed plumbing and raw brass for hidden applications.

Crane Close-Coupled Toilet Flapper
Hard to find these days, these flappers were found in many toilets Crane made in the ‘60’s and early ‘70’s. After Crane was bought out, production ceased and aftermarket suppliers started reproducing them. Over time, production slowed, and it became hard to find again. Distinguished by the method of mounting, they are once again available. Flapper is retained to the flush valve by the elongated hole in the end. Definitely not your “standard” flapper.
80-0108 Crane Flapper 7.95