OLD TIME MORTISE LOCK AUTHENTIC MORTISE REPLACEMENT
Replaces most interior mortise locks used in the early 1900s. Skeleton key (bit key) operated. Bright brass plated finish, includes two keys. Reversible
for left or right hand applications. Includes standard 9/32" spindle and 1" x 4" strike plate. 2 1/4" diameter round knobs. Face plate is
1"x 6" long. Spring latch has a 3/8" throw; 1/2" throw deadlock. Mortise cut out is 4 1/8" high x 3" deep. Easy to
install- screws included. 2-1/4” Backset. 88-3460 Mortise Lock keyed both sides 27.95 88-44610 w/ thumb turn one side, no keys 27.95 (Thumb turn latch may be opened from outside with small screwdriver in case of accidental lock-in.)
Glass Knob Brass Mortise Lock Same as above set except with glass instead of brass
handles. Available keyed both sides with 2 keys or with thumb turn (pictured.) Mortice cut out is 3 1/8” tall by 3 1/4” deep, strike plate is 1” x
4”. Face is 1” by 5 1/2”. Thumb turn latch lockset may be opened from outside with a small screwdriver in case of accidental lock-in. 88-44622
Glass knob mortise lock w/ thumb turn 29.95 88-44621
Glass knob mortise set, keyed 2 sides 29.95
Note’ the above lockset is NOT chrome, it’s polished brass!
GLASS DOOR KNOBS These glass door knobs are a great
replacement for old, worn knobs. Standard 9/32" spindle will fit most locks and is 3 1/2" long. Crystal knob is 2" in diameter and has a brass plated
base which will fit a 5/8" socket. Use with escutcheons and latches sold separately above or as replacement for broken originals. 05-380
Crystal Knob and Spindle Set 12.95
Hard-to-Find Parts for Old Mortise Locks
KEYHOLE PLATES The ideal replacement keyhole
plate for mortise locks. Made of solid polished brass, includes nails. Measures 1-5/32" wide by 1 1/2" high. 04-E2B
Keyhole Plate, pair 5.46 THUMB TURN
Solid brass thumb turn comes complete with brass screws. 3/16” square shank is 7/8" long. . 04-L30A Thumb Turn 11.50
Door Knob Rose Solid Brass replacement door knob roses,
2-1/2” outside diamete, 5/8” inside diameter. Clear protective coating. Four screws included, compatible with most
knob sizes. 91-1141 Brass Rose, pair. 9.85
Replacement Trim for Old Mortise Lock & Passage Sets.
REPLACEMENT SPINDLE Steel 9/32" square spindle is 3 1/2" long with a 3/8"-20 thread. The two solid brass set screws are 9/32" long with
1/4"-20 thread 88-245 Spindle Set 4.50
HEADLESS BRASS SCREWS 5/16" long by 1/4"-20 thread. 91-760-02 Brass Spindle Screw .50 91-760-02-25 Bag of 25 Screws 7.50
HEADLESS PLATED SCREWS Brass plated steel, 3/8" by 1/4"-20 thread. 91-760-03 Plated Spindle Screw .50 91-760-03-25 Bag of 25 Plated Screws 7.50
OVAL BRASS PLATED SCREWS Brass plated oval head steel screw fits many old rim lock spindles. 3/8" long, 9mm-24 thread.
91-760-04 Plated Spindle Screw .50 91-760-04-25 Bag of 25 Oval Screws 7.50
STRIKE PLATE Hard to find strike plate fits old style mortise locks. Made of brass plated steel. Measures 7/8" wide by 3 3/8"
long, spacing of openings is 11/16", center to center. Screws included. 91-733 - 4.50
