|
Tank Parts for High and Low Tank Toilets:
|
|
Finish:
|
Polished Chrome
|
Uncoated
Pol. Brass
|
Coated
Pol. Brass
|
Polished Nickel.
|
|
Solid Brass & Copper ballcock, no plastic parts! Includes solid copper refill tube, copper float & rod. Exposed
nuts are polished or plated in choice of finish.
|
|
94-565 Brass
& copper ballcock
|
67.00
|
65.00
|
67.00
|
67.00
|
|
Anti-Syphon adjustable height ballcock. Extremely versatile, reliable unit will fit most any tank. (The valve we use in all of
our complete toilet sets.) Exposed nuts are solid brass, polished or plated in your choice of finish.
|
|
05-400A Adjustable ballcock.
|
30.00
|
28.00
|
30.00
|
30.00
|
|
Copper Ball Float.
4” x 5” w/ 1/4-20” female thread.
|
05-8133 9.95
|
|
Solid brass 7/8” locknuts and Slip-Joint nuts for ballcock. Dress up those exposed
fittings with polished or plated nuts under your high or low tank.
|
|
94-779 7/8” SJ nut.
|
9.00
|
8.00
|
8.00
|
9.00
|
|
94-778 7/8” locknut
|
9.00
|
8.00
|
8.00
|
9.00
|
|
Hard to Find “Curtin Style” Top Fill ballcock for toilets that fill from the inside top rear of
tank. 3/8” FIP inlet with integral shutoff valve, copper float, float rod, and refill tube.
|
|
47-CT120 Ballcock
|
Rough brass
|
139.00
|
|
|
Side Fill Ballcock for old high tanks that fill over the top or through side. 1/2” MIP inlet with copper float
and brass float rod. (No refill tube)
|
|
75-R700 Ballcock
|
Rough Brass
|
55.00
|
|
|
Solid brass Douglas-style flush valves. Extra-long shank fits through thicker porcelain
and wood tanks. Includes tank ball, upper & lower lift wires, guide and washer. Exposed locknut is polished or plated in your choice of finishes.
|
|
94-135
2” IPS , 1-3/4” long shank. Fits all low tank and most reproduction. high tank toilets.
|
Polished Chrome
|
Uncoated Brass
|
Coated Brass
|
Polished Nickel
|
|
59.00
|
58.00
|
59.00
|
59.00
|
|
15-FVG Beveled flush valve
washer, seals flush valve to bottom of tank. Fits 2” flush valves
(94-135) also fits 24-MS Maddox Spud.
|
15-FVG 3.00
|
|
62G116 Flat flush valve washer, 3 3/16
OD, 2 1/4 ID, 1/16” thick, for extra thick wooden tanks
|
62G116 4.75 each
|
|
62G316 Flat flush valve washer, same ID and
OD as the 62G116, but 3/16” tall for thick wood tanks
|
62G316 4.95 each
|
|
Rare 1-1/4” and 1-1/2” flush valve for old high tanks. Replaces obsolete syphon-type flush valve.
1-1/2” MIP x 2-1/2” long outlet. Fits through 1-7/8” hole. Uses standard tank ball or flapper, complete.
|
|
24-FV4 1-1/2” shank, fits 1-1/4” flush tube
|
N/A
|
125.00
|
