“Speakman Anystream” Showerhead
Fully restored in Polished Nickel, this is one heck of a head. 1/2” pipe thread, with ball joint. Overall length is 6”. Speakman heads are some of the finest showerheads made. Grab it quick!
OSH08300 Speakman head SOLD

Vertical mount showerhead
Replated in polished Nickel, this head is intended for strictly a vertical mounting. Fixed, non-adjustable. 3 3/4” across, 1/2” pipe thread. Perfect for your outdoor shower!
OSH08301 Showerhead 95.00
 

Vertical-Mount Showerhead
This is the head from a Ribcage shower. 3/4” pipe inlet, and fully replated in Polished Nickel. Watertight, vent still functions, but does have a dent on the top (as seen in pic) 8” across, 4” tall. Intended for vertical mount, does not swivel. Definitely not a water-saving showerhead!
OSH08302 225.00

Cast Brass Art Deco Showerhead w/ swivel
Perfect for that ‘30’s bath, this showerhead has been fully restored in Polished nickel. Head will screw onto a 1/2” pipe nipple stubbed out of the wall. 4 1/2” overall, approximately 30 degrees of swivel. Original antique, NOT a water-saver
OSH08303 Deco showerhead SOLD

Vertical Mount Showerhead
Another Ribcage showerhead, this one will need 3/8 pipe. Early brass tends to split, this one has, but it’s not into the actual head part. The largest split is visible in the picture at left, at the very bottom of the head. Measures 7 1/2” across, and is 3” tall.
OSH08304 Showerhead 195.00
 

Extended Shower Arm and Head
Fully replated in polished Nickel, this head extends out 12”. Original flange attaches with a set-screw, will need a 1/2” pipe drop-ear elbow in the wall. Not a water saver... Head is 3 3/4” in diameter with approximately 30 degrees of swivel.
OSH08305 Showerhead 175.00