“Samuel Heath” Single Hole Basin Tap
These are perhaps the finest single hole faucets made. They are manufactured by Samuel Heath in Great Britian, in the same factory building that they’ve occupied since the early 19th century. 
This faucet has a wonderful ceramic detail, with the Samuel Heath name and number printed on the top. Very heavy brass construction, will require deck hole to be at least 1 1/4” in diameter, and base is 2 3/8” in diameter. Comes with a heavy, cast brass pop-up drain assembly. 3 finishes to choose from!
96VAC09CP Chrome 653.00
96VAC09PN Pol. Nickel 727.00
96VAC09SN Satin Nickel 765.00
 

Slant Back Faucet
Designed for older sinks that have the faucet holes at a 45 degree angle. 1/2” IPS inlet. 3-1/16” spout length, 45 degree cast brass spout. Adjustable centers from 4” to 6”. Includes pop-up drain. Faucet is designed to work on sinks with three 1-1/4” in-line holes. Pop-up linkage may not work on sinks that have a smaller center hole or on sinks that have a separate hole for a pop-up rod.
Chrome Finish Only.
SLANTBACK 210.00 

Shelf Back Faucet
Same as above but for sinks with vertical backsplashes.
Centers adjustable from 4” to 6”. Includes pop up drain. Cast brass spout extends 2-1/8”. 1/2” IPS inlets, handle escutcheons are 1-3/4” diameter, spout base is 1-3/4” wide x 2-3/8” high. Chrome finish only.
SHELFBACK  195.00

For an additional $50, we can adapt this faucet to fit hole centers wider than 6”. Please call for details.

Rare Find! New Old Stock faucets in original Kohler boxes
Heavier than anything you can buy new today

NEW OLD STOCK!
Circa 1950 Kohler flanged sink faucets. Highly polished chrome, extra-heavy brass bibbs have 1/2” FIP inlet x 3/4” hose outlet. 2-1/4” wall flange, spout extends 3-1/4” from wall. Chrome plated brass (not zinc!) handles, 1/2-turn stems with renewable seats. Faucets are sold in pairs, handles are engraved “H” & “C”. Perfect for farmhouse and utility sinks, would also make outstanding exterior hose bibbs.
15-K78736 NOS Kohler bibbs, pair 49.00

OLD-STYLE BIB FAUCETS
Female Plain End Bib Replacement faucet for old sideboard style sinks. Faucet is 3 1/2" long, 1/2" FIP inlet.
90-7110 Polished Chrome Plated 17.95
Adjustable Flange Plain End Bib
Replacement faucet for old side board style sinks. Faucet is 3 1/2" long, 1/2" MIP inlet with 2" OD flange that adjusts 3/4".
90-1002 Polished Chrome, not shown 19.95
Adjustable Flange Hose End Bib
Replacement faucet for high-back kitchen sinks or laundry tubs. Faucet has male hose thread outlet, 1/2" MIP inlet with 2" OD flange that adjusts 3/4".
90-7114 Polished Chrome Plated 19.95