Wall Hung Sinks

Mini Wall Hung Basin
Vitreous china sink with 2 integral self-draining soap dishes. 14”w X 12”d. 4” faucet centers.
05-12354 Wall Hung Sink 95.00 
Freight billed actual cost

Original Victorian Wall Sinks
Original antique sinks, original finish and refinished. Click on photo at right to view our current selection.
Circa 1910 Corner Sinks  595.00 and up.
Subject to Availability click photo to view current selections.
Circa 1910 Half-Circle Sinks  595.00 and up.
Subject to Availability, click photo to view current selections.

click on photo to view current selections

Refinished Corner Sinks
Circa 1954 cast iron corner sink. Measurements vary from 17-19" wide to 22" from corner. 425.00 and up
Click on photo to view current selection.
Subject to availability.

Click on photo to view
current selections

Thomas Crapper & Company Wall Hung Basin
This beautiful wall hung basin comes in two sizes and can be mounted on the Thomas Crapper Brackets or on our large brass brackets (below), or your cabinet brackets. The tap holes are 6-1/4” apart and 1-3/16 in diameter. Backsplash is 4” at it’s highest point. Note the detailed soap dish and, of course, the Thomas Crapper logo. Use single basin faucets or our Pencil Neck Mixing Tap.
37-22 17” x 22-1/2” Basin 1132.00  
37-25  19-1/2” x 25” Basin 1293.00  
freight billed actual cost
Drain sold separately. Use # 81-253, or #90-503 from our
Sink Drains page, and the 20-62257 chain stay.

Click here to see the rest of the Thomas Crapper line of fine sanitaryware and accessories

CHINA LAVATORY HANGER
China Lavatory Hanger Stamped steel brackets in 3 styles
90-1648 7" long by 3" high 9.95 each, can be nested in pairs for added strength

90-1652 15" wide, fits mounting lugs 10" on center or can be cut in half to fit wider spacings on sideboard and large cast iron sinks. Lug pocket 2 1/4" wide. Nest in pairs for added strength. 12.95 each

90-1647 Two-piece, 1 3/4" wide by 2 1/8" high, pair 3.50 

Cast Iron Sink Bracket
When we couldn’t find original brackets for our extensive supply of antique sinks, we decided to have some cast from an original pattern. Made of 3/8” thick Cast

HEAVY CAST BRASS PEDESTAL SINK BRACKETS
5 3/4" long wall-mounting plate is 2 1/4" wide by 2 3/4" high. Sink mounting slot is 1/4" wide by 2 1/4" long. Will fit sinks with holes between 3” and 5 1/4” away from finished wall surface. Screws not included.
79-GB635 Heavy Cast Brass, uncoated. Pair 55.00 
79-GB635C Chrome plated, Pair 75.00            
79-GB635N Nickel Plated. Pair 75.00             

Crane Pedestal Sink Brackets
Fits many others as well! Made of durable Stainless Steel, and designed to specifically fit Crane Pedestal sinks, these brackets are a copy of an original bracket. Will fit any sink that has holes at least 11/16” diameter and anywhere between 1” to 5” away from the wall. The slots cut in the back allow fine tuning when leveling the sink. Be sure to have at least 3” of depth in the sink to allow for the toggle. Bracket itself measures 5 3/4” long by 2” wide and sticks down 2 1/8”. Comes with everything shown and a set of directions.
59SB Sink bracket kit 29.95

Thomas Crapper Sink & Cistern Brackets
Ornamental Cast Iron Brackets with the Thomas Crapper & Company logo. Unusual plain iron brackets with unfinished wood “patras” are the perfect addition to the Thomas Crapper bathroom. Use under high or low toilet tank, as a sink bracket, or under a glass or wood shelf. A classic design for any room or decor. Primered, ready-to-paint with unfinished wood patras.
37-754 Cistern Bracket 7-1/2” high x 7” long, pair 229.00
37-791 Basin Bracket 10” high x 13” long, pair 375.00  
37-736 Cloakroom basin bracket, 4” x 4 3/4”, pair, no logo, 114.00
Click here to see more Thomas Crapper & Co Items!

New! Console Type Leg Kit with Towel Bars
A Bathroom Machineries Exclusive
Double leg kit measures 36” wide with 36” tall legs. Side towel bars are 24” long. All tubes may be cut to desired lengths. Legs have 1-1/2” screw adjustment for leveling. Constructed of 1” diameter brass tubing and solid cast brass fittings. A simple yet elegant design that is at home in both vintage or contemporary decorating schemes. Suitable for marble tops or china sinks.
15-275U Unlacquered polished brass leg kit 575.00
15-275L Coated polished brass leg kit 645.00 
15-275C Polished Chrome leg kit 645.00     
15-275N Polished nickel leg kit 645.00  
15-275BN Brushed nickel leg kit 695.00 
Shop Item
Custom Sizes and design available. Call or email for details.

New! Console Sink Legs
A Bathroom Machineries Exclusive
Leg kit features 1” O.D. brass tubing and solid cast brass fittings. Legs are 36” long and may be cut to any desired length. Top caps have 1-1/2” of adjustment for leveling. Simple, clean lines are at home in both vintage and contemporary decorating schemes. Suitable for marble tops or china console sinks.
15-75U Unlacquered polished brass leg kit 265.00
15-75L Coated polished brass leg kit 295.00 
15-75C Polished Chrome leg kit 345.00     
15-75N Polished nickel leg kit 345.00  
15-75BN Brushed nickel leg kit 395.00 
Shop Item
Custom Sizes and design available. Call or email for details.

Deco Style Sink Leg Kit
Original style legs will fit most china or cast iron sinks. Polished stainless steel legs are 3/4” x 28” max. long and may be cut down to length. Hexagonal 2” top flanges are chrome plated steel.
34-132N Deco Legs, chrome / SS only. 49.00, pair.

Rope Brass Sink Leg Kits
We can custom make these brass legs to fit your marble top or wall-hung china basin. Kits come complete with brass and glass claw and ball feet, 1-1/8” rope brass tubing, and all hardware to connect to bottom of sink and wall. Vertical bar(s) are 33” tall, horizontal bars is 36”, wall bar(s) are 24”. Cut tube to fit and assemble with set-screw tee and fittings. 
Single Leg Kit (as shown) with 2 horizontal bars, 2 wall flanges, and one leg.
15-KITL-1B  Coated Brass. 750.00
05-KITL-1N Nickel Plated 750.00 
Double Leg Kit
With 3 horizontal bars, 2 wall flanges, 2 legs.
15-KITL-2B Coated Brass 995.00
15-KITL-2N Nickel 995.00      
 Shop Item
Also available without horizontal bars and in custom sizes and styles. Please call or email with your specs. for quote.

Reproduction Sink Legs
An exact replica of an original antique leg from 1935.
Made right here in Murphys California, these top-quality legs weigh over 5 lbs per pair. Fully adjustable from 24-1/2” to 28-1/2” long, top tube is 7” long machined brass, 1-1/2” diameter at top. Leg is 3/4” heavy brass tubing. Solid brass bottom tip is 3/16” diameter and sets into hole drilled in floor to keep leg from moving. Priced each.
15-65 Mill Finish, not coated 235.00 each.     
15-65B Brass, polished & Coated 295.00 each.
15-65N Polished Nickel 295.00 each.        
 Shop Item